In various industrial and high tech line aligning work fields, not any longer limited by long distance, high height and other complex working environments, it is always making easy job to make clear and accurate line alignment with the assistance of laser line generator glass coated lens. It is available with a lot of selected wavelengths, including 405nm violet, 445nm blue, 515nm and 532nm green, 635nm and 650nm red, and 808nm and 980nm infrared laser modules. Either it is pointing for formal inner room or night version, users can always select a visible or invisible IR laser line, and make highly fine line alignment in process of long time line aligning works.

Being made with qualified glass coated lens, it is projecting Gaussian beam. Unless it is pointing the highest level of accuracy line alignment, laser line generator glass coated lens is enough to make moderate accuracy and fineness line alignment. When it is pointing onto different working surface, it is in need to generate different line length and line fineness. It allows freely selected fan angles within 10 degree to 110 degree. Only after basic measurement and experiment of technical data, line laser module enables correct use of optic lens degree, and highly clear line indication for multiple working occasions.

Glass coated lens laser line generator is pointing onto different surfaces, and generating various line lengths. For instance, it is able to get different line lengths within 0.5 meter to 6 meters. When laser line is pointing at close distance of 10cm, it is only getting 0.3mm line width, and about 1mm to 2mm line width at 2 meters work distance. The general laser line alignment enables the maximum work distance of 25 meters and formal lighting working occasions. Any type of visible laser light cannot be observing by human eyes under sunlight, thus it should be operating without such occasion.

In various line aligning work fields, laser line generator lens is equipping with adjustable focus optic lens. After quite easy screw of adjustable focus optic lens and intense laser light focusing from beam aperture, it makes the most efficient conversion of highly fine and straight laser line emission. In formal continuous line alignment work within 8 to 10 hours per day, only if there is enough time leaving for tube cooling down, this line laser module achieves excellent laser light cycling use and long lifetime in proper use.